By Alyce Powell
Sculpting in glass has always been a very challenging and delicate form of sculpting simply because it is not an easy task to handle shards and making something out of these pieces. If one is an artist and would like a little challenge, then it is suggested that he try to make a glass sculpture Alberta. If he would want to but does not know where to start, then here are some ideas on how to.
Now take note that this kind of activity is quite dangerous because one may get cut by some of shards that he is using. That is why he will be needing some equipment and some supplies that will be able to keep him from getting hurt. Some of the things that he will be needing would be some goggles, some gloves, a torch, a kiln, and a graphite paddle.
Now take note that this kind of activity is quite dangerous because one may get cut by some of shards that he is using. That is why he will be needing some equipment and some supplies that will be able to keep him from getting hurt. Some of the things that he will be needing would be some goggles, some gloves, a torch, a kiln, and a graphite paddle.
So to start of, one should first put on his goggles and his gloves so that his hands and eyes will not get hurt. Some other things to wear in order to be protected would be some long sleeves and a short apron so that the shards will not go to the body. After all of this is done, then one may now on the torch and start with the building.
After lighting up the torch, then the next thing to do would be to start off with a small piece. One has to be extremely careful at this point because he will be melting the shard with the torch which means he will point the torch at the small piece. Once it is a little bit soft already, one can now make a ball.
The first thing to do with these balls would be to actually create a small base from these things. The base is one of the most important parts of the sculpture because it will be the thing that will hold the figure. The thing that will be used for the creation of the base would be none other than the graphite paddles.
When that is done, continue to make a few more balls in order to shape up the base and make it sturdy. After that has been made, then the next thing to do would be to concentrate on making the figure next. To start off, one must first preheat the kiln because he will use it later on.
While the kiln is heating up, one will be making the figure and will be attaching it to the base and build up from there. One will be using some tweezers in order to pull together the hot glass and turn it into something that is solid. Of course he will also be usin
After lighting up the torch, then the next thing to do would be to start off with a small piece. One has to be extremely careful at this point because he will be melting the shard with the torch which means he will point the torch at the small piece. Once it is a little bit soft already, one can now make a ball.
The first thing to do with these balls would be to actually create a small base from these things. The base is one of the most important parts of the sculpture because it will be the thing that will hold the figure. The thing that will be used for the creation of the base would be none other than the graphite paddles.
When that is done, continue to make a few more balls in order to shape up the base and make it sturdy. After that has been made, then the next thing to do would be to concentrate on making the figure next. To start off, one must first preheat the kiln because he will use it later on.
While the kiln is heating up, one will be making the figure and will be attaching it to the base and build up from there. One will be using some tweezers in order to pull together the hot glass and turn it into something that is solid. Of course he will also be usin
The first thing to do with these balls would be to actually create a small base from these things. The base is one of the most important parts of the sculpture because it will be the thing that will hold the figure. The thing that will be used for the creation of the base would be none other than the graphite paddles.
When that is done, continue to make a few more balls in order to shape up the base and make it sturdy. After that has been made, then the next thing to do would be to concentrate on making the figure next. To start off, one must first preheat the kiln because he will use it later on.
While the kiln is heating up, one will be making the figure and will be attaching it to the base and build up from there. One will be using some tweezers in order to pull together the hot glass and turn it into something that is solid. Of course he will also be using the graphite paddle to straighten all of the parts and make it look like a real sculpture.
While the kiln is heating up the glass sculpture Alberta, one has to lower the heat every one hour. By doing this, he is slowly letting the sculpture form and at the same time not break down. After the heating, one can now allow it to cool down.
About the Author:
When that is done, continue to make a few more balls in order to shape up the base and make it sturdy. After that has been made, then the next thing to do would be to concentrate on making the figure next. To start off, one must first preheat the kiln because he will use it later on.
While the kiln is heating up, one will be making the figure and will be attaching it to the base and build up from there. One will be using some tweezers in order to pull together the hot glass and turn it into something that is solid. Of course he will also be using the graphite paddle to straighten all of the parts and make it look like a real sculpture.
While the kiln is heating up the glass sculpture Alberta, one has to lower the heat every one hour. By doing this, he is slowly letting the sculpture form and at the same time not break down. After the heating, one can now allow it to cool down.
About the Author:
Our unique web page at www.claudegarneaustudio.ca contains valuable information about glass sculpture Alberta area. To receive further details, review the main website by clicking on the link http://www.claudegarneaustudio.ca today.